Tile Leveling Tools

This Combination of Professionally Adjusted Tile Tools Increases the Efficiency of Tile Laying, Ensures Flatness Between Tiles and Avoids Inequalities.

FEATURE:

• Reduces Installer Fatigue/ress.
• Reduce the Need for Grinding and Polishing.
• Wear-resistance,reusable and Durable to Use.
• Keep the Balance of the Tiles in the Same Horizontal Position.
• Useful for Preventing Tiles from Moving During the Curing Process.
• Perfect for Making Tile Laying Speed Faster and Improving Working Efficiency.

• Insert the T-pin Along the Crack (between 2 to 6mm) , then Rotate It 90 Degrees.
• Clamp the T-pin at the Bottom of the Two Bricks.
• Tighten the Adjusting Cover So That the Two Bricks Are in the Same Level.
• Wait About 4-5 Hours After Leveling.
• Before the Cement or Tile Glue Has Completely Dried Up (usually No More Than 6 Hours). Rotate the Adjustment Cover Counterclockwise, Rotate the T-type Leveler 90 Degrees to Make It Parallel to the Tile Gap, and Taken Out.
• Remove the Leveler,clean and Dry Storage for Reuse.

INSTALLATION TIPS：

• When Tightening, It is Best to Rotate the T-needle Back and Forth a Few Turns to Make the Sorrounding Cement Reserve Some Space So That the Tile Leveling Set Can Be Easier Removed.
• Before the Cement or Tile Glue Has Completely Dried Up (usually No More Than 6 Hours), Tighten the Adjusting Cover in the Opposite Direction, then Rotate the T-pin 90 Degrees So That the T-pin Turns to a Zigzag Parallel to the Tile.
• The Tile Leveler is Suitable for Tile Gap Between 2mm to 6mm and Tile Thickness of 3mm to 17mm.

SPECIFICATION:

• Product Material: Thickened Pp Plastic + Manganese Steel
• Suitable for Tile Thickness: 5-16mm/0.2-0.63inch
• Suitable for Tile Joints: 1. 5mm/0.06inch and Above 1.5mm/0.06inch